Behringer EPX2800
Behringer EPX2800
Regular price
AED 0.00
Regular price
Sale price
AED 0.00
Unit price
/
per
Behringer-EPX2800Power amps have always been heavy, mainly because of their massive transformers and heat sinks. Behringer's new EPX Series amps are based on groundbreaking switch-mode power supply technology, which eliminates the heavy transformer. As a result, these amps weigh about 40% less than their conventional counterparts. In fact, the EPX2800 is 22.3 lbs (10.1 kg) each, so you can practically lift it with just one finger. Best of all, EPX Series amps are super-reliable and provide even tighter bass performance than their predecessors, since they can deliver ultra-high peak currents on demand. In a Class of Their OwnThe secret to the EPX Series_ incredible power-to-weight ratio is the use of a switch-mode power supply combined with Class-H topology. Because they work on demand, instead of operating continuously at full power, switch-mode power supplies are much more efficient than traditional power supplies. And since they don_t require the massive transformers and heat sinks typically found in conventional power amps, they are significantly smaller and lighter, yet still deliver ample power.Think of a Class-H amp as being similar to a car with two engines (in amps, they are called _rails_). One engine runs all the time. The other runs only when musical peaks demand the extra power output. An EPX Class-H amp only generates a fraction more power than is immediately needed, while the output stage operates at its maximum efficiency all the time. And just like in today_s hybrid cars, the efficiency of this dual system is far greater than having just one engine or rail that has to operate continuously.Accelerated Transient Response Delivers the Knockout PunchIt takes huge pulses of energy (current and voltage) to propel a woofer cone out fast enough to match a bass beat. That_s called Transient Response and it_s the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of Behringer_s circuitry, EPX amps can react instantly to even the most demanding electronic bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.BEHRINGER didn_t invent Class-H technology, but Behringer_s R&D Department has been working for years to perfect their own version, creating lightweight amps that run cool and achieve our goal of Accelerated Transient Response.Everything You NeedThe simple front panel controls of these amps give you all of your sound_s vital signs at a glance. After pressing the Power Button, the POWER LED will light when the amp is ready for action. Both channels have independent gain dials, as well as CLIP LEDs that notify you when the signal is distorted and you need to reduce the gain. There are also SIGNAL LEDs that light up when a signal is present at the input. Panel DiscussionThe EPX Series_ INPUTs accept balanced XLR, _ " TRS, and unbalanced _ " TS and RCA connections. Take your pick of professional locking speaker outputs or touch-proof binding posts to securely connect speakers.A panel of switches located on the back off ers an array of cool options applicable to both channels. The switchable Clip Limiter lets you get even more out of the amplifier without overdriving either it or your speaker system. Built-in circuitry automatically senses when the amp is being overdriven into _clipping_ and instantaneously reduces the input level just enough to avoid clipping distortion.Built-In CrossoverThe rear panel also contains a switch that allows you to put these amps to work in mono, stereo (two-channel mode) or bridge mode, which is always mono. A built-in CROSSOVER switch lets you put the amp into biamp mode, which sends low-frequency content (< 100 Hz) to the CH2 Output and the high-frequency component to CH1 automatically, no external hardware required. ValueBEHRINGER_s EPX Series amps are built for the working musician. They are much lighter than conventional power amps, pack massive power, feature built-in crossover and limiter circuits, and can withstand the rigors of the road. Plus their light price tag will leave money in your pocket to buy more stuff to amplify!Professional 2800-watt lightweight stereo power amplifier with ATR technology.Output PowerRMS PowerStereo Mode (both channels driven)8Ohms per channel, stereo 350W4Ohms per channel, stereo 600W2Ohms per channel, stereo 990WBridged Mono8Ohms / 1 kHz @ 0.1% THD 1,220W4Ohms / 1 kHz @ 1% THD 2,000WPeak PowerStereo Mode (both channels driven)8Ohms per channel, stereo 440W4Ohms per channel, stereo 800W2Ohms per channel, stereo 1,400WBridged Mono8Ohms bridge mode 1,620W4Ohms bridge mode 2,800WInput Sensitivity 1 VDistortion <0.01%Frequency Response 20 Hz - 20 kHz, +0/-1 dBVoltage Gain 35 dBDamping Factor > 300 @ 8OhmsInput impedance 10 kOhms unbalanced, 20 kOhms balancedSignal-to-Noise > 100 dBAControlsFront POWER switch GAIN control (channel 1 and 2)Rear MODE switch X-over Switch, BRIDGE MODE switchIndicatorsPOWER: Blue LEDsCLIP (per channel): Blue LEDsPROT (per channel): Blue LEDsSIGNAL (per channel): White LEDs -20dB-10dBSIGNAL (per channel): White LEDs -10dB 0dBConnectorsInputs: Balanced XLR, 1/4" TRS , RCAOutputs: Speakon and _touch-proof__ binding postsCircuit protection: Cooling Continuously variable speed fan, back to front airflowAmplifier protection Full short circuit, open circuit, thermal,ultrasonic, RF protection. Stable into reactive or mismatched loadsOutput circuit type: Class HPower supply / Voltage (Fuses)USA / Canada: 120V, 60Hz (T 20 A H 250V)UK / Australia: 240V, 50Hz (T 10A H 250V)Europe: 230V, 50Hz (T 10 A H 250V)Japan: 100 V, 50-60 Hz (T 20 A H 250V)Power consumption: 3,000WMains connector: Standard IEC receptacleDimensions (HxWxD): 3.46" x 19.01" x 14.68", 88 x 483 x 373 mmWeight: 22.26 lb. / 10.10 kg
Our pricing is fiercely competitive. Please contact us for the very best price right now!